top of page
B1 logo.png

OPALE Parachutes is a company specialized in parachute systems and rescue systems for drones, headquartered in Marquise - France.

​

OPALE Parachutes develops technologies and equipment to ensure the safety and effective recovery of drones in emergency situations, such as engine failures, loss of control, or other risky situations

IATEC Plant Solutions can share its extensive experience in the application of drone to assist its clients in selecting, purchasing, and maintaining the full range of OPALE Parachutes products.

KIT SAFETECH ST160

Pioneer in the drone rescue parachutes development, OPALE Parachutes introduces its brand new range of SAFETECH® products.

​

The kit will allow you to install the rescue parachute system SAFETECH ST160 in only few minutes on your DJI M600 / M600 PRO. And without doing any modifications on the MATRICE.

09-IATECPS- OPALE Parachutes - Kit Safetech ST160 - MATRICE 600 MATRICE 600 PRO.jpg
10-IATECPS- OPALE Parachutes - Kit Safetech ST160 - MATRICE 600 MATRICE 600 PRO.jpg
Logo IATEC.png

Simple and groundbreaking technology:

  • Parachute rescue system will allow you to secure your drone in any circumstances;

  • The ST160, the main parachute is ejected and deployed between 0.8 s - 1.5 s, with a deployment height between 8 and 15 m. The Safetech® does not apply a permanent pressure on the parachute, which allows to guarantee a safe ejection, a super fast deployment and also a longer parachute shelf life;

  • Simple and fast fixation allows an universal mounting on all machines available on the market.

​

Resistance:

  • The rescue parachute strap is of Aramid/Kevlar, ensuring a rupture resistance of 300 kg (661lb). The lines and the strap are knots free, 100% mechanical resistance and an outstanding finish, for an optimal lifespan;

  • The parachute is made of the same quality standards than a rescue parachute ULA. The fabrics have a silicon coating, with a really low mass (only 32 g/m2), that offers an extremely light system.
     

A low impact energy:

  • The parachute design was developed to offer a lighter, more compact rescue system, flight stability and opening efficiency. Low sink rate with a maximum impact energy of 264 J for a 25 kg (55.1 lb) drone, with a rescue parachute kit weighing just 1200 gr (2.65 lb);

  • The result of this low-impact energy allows you to register the equipment according to your country's regulations.

​

Security, safety and reliability pledge:

  • Pyrotechnic free: air transport and maintenance routine easy and safe, SAFETECH® prevents uncontrolled explosion risk;

  • The parachute is free from  permanent pressure: shelf life increased, super fast and efficient deployment;

  • Fuse system free: no useless battery weight, deployment time shorter and optimized, no Lipo battery inflating risk and no fire risk.

TECHNICAL SPECIFICACIONS

  • ST160 tube dimensions: 154 x 160 mm / 6.1 x 6.3 in;

  • Material: Carbon;

  • Total weight: 1200 gr / 2.65 lb;

  • Servomotor connector: UNI;

  • Signal: PWM compatible with a transmitter or a stand-alone module;

  • Tension: 4.8 to 6.0 v;

  • Flat area: 12 m2 / 129 ft2

  • Lines: Dynema / Spliced Aramid Kevlar (no knot);

  • Fabrics: 32 gr/m2 with silicon coating;

  • Fixation strap: Aramid 300 daN (300 kg / 661.4 lb);

  • Super fast deployment: 0.8 - 1.5 s;

  • Low sink-rate:  2.6 to 4.6 m/s;

  • Easy to install;

  • Universal mounting;

  • Locked for the transport.

​​

KIT SAFETECH ST80D

Pioneer in the drone rescue parachutes development, OPALE Parachutes introduces its brand new range of SAFETECH® products.

​

The kit will allow you to install the rescue parachute system SAFETECH ST80D in only few minutes on your DJI M200 / M210. And without doing any modifications on the MATRICE.

05-IATECPS- OPALE Parachutes - Kit Safetech ST80D - MATRICE 200 MATRICE 210.jpg
Logo IATEC.png
10-IATECPS- OPALE Parachutes - Kit Safetech ST160 - MATRICE 600 MATRICE 600 PRO.jpg

Simple and groundbreaking technology:

  • Parachute rescue system will allow you to secure your drone in any circumstances;

  • The ST80D, the main parachute is ejected and deployed between 0.8 s, with a deployment height between 3 and 8 m. The Safetech® does not apply a permanent pressure on the parachute, which allows to guarantee a safe ejection, a super fast deployment and also a longer parachute shelf life;

  • Simple and fast fixation allows an universal mounting on all machines available on the market.

​

Resistance:

  • The rescue parachute strap is of Aramid/Kevlar, ensuring a rupture resistance of 300 kg (661lb). The lines and the strap are knots free, 100% mechanical resistance and an outstanding finish, for an optimal lifespan;

  • The parachute is made of the same quality standards than a rescue parachute ULA. The fabrics have a silicon coating, with a really low mass (only 32 g/m2), that offers an extremely light system.
     

A low impact energy:

  • The parachute design was developed to offer a lighter, more compact rescue system, flight stability and opening efficiency. Low sink rate with a maximum impact energy of 57 J for a 6 kg drone, with a rescue parachute kit weighing just 315 gr;

  • The result of this low-impact energy allows you to register the equipment according to your country's regulations.

​

Security, safety and reliability pledge:

  • Pyrotechnic free: air transport and maintenance routine easy and safe, SAFETECH® prevents uncontrolled explosion risk;

  • The parachute is free from  permanent pressure: shelf life increased, super fast and efficient deployment;

  • Fuse system free: no useless battery weight, deployment time shorter and optimized, no Lipo battery inflating risk and no fire risk.

TECHNICAL SPECIFICACIONS

  • ST80D tube dimensions: 120 x 80 mm / 4.7 x 3.1 in;

  • Material: Carbon;

  • Total weight: 315 gr;

  • Servomotor connector: UNI;

  • Signal: PWM compatible with a transmitter or a stand-alone module;

  • Tension: 4.8 to 7.2 v;

  • Flat area: 3 m2 / 26.9 ft2

  • Lines: Dynema / Spliced Aramid Kevlar (no knot);

  • Fabrics: 32 gr/m2 with silicon coating;

  • Fixation strap: Aramid 300 daN (300 kg / 661.4 lb);

  • Super fast deployment: 0.3 - 0.8 s;

  • Low sink-rate:  3 to 5 m/s;

  • Easy to install;

  • Universal mounting;

  • Locked for the transport.​

KIT ST60X - INSPIRE 2

Pioneer in the drone rescue parachutes development, OPALE Parachutes introduces its brand new range of SAFETECH® products.

​

The kit will allow you to install the rescue parachute system SAFETECH ST60X in only few minutes on your DJI INSPIRE 2. And without doing any modifications on the DJI.

04-IATECPS- OPALE Parachutes - Kit Safetech ST60X - INSPIRE 2.jpg
Logo IATEC.png
10-IATECPS- OPALE Parachutes - Kit Safetech ST160 - MATRICE 600 MATRICE 600 PRO.jpg

Simple and groundbreaking technology:

  • Parachute rescue system will allow you to secure your drone in any circumstances;

  • The ST60X, the main parachute is ejected and deployed between 0.8 s, with a deployment height between 3 and 8 m. The Safetech® does not apply a permanent pressure on the parachute, which allows to guarantee a safe ejection, a super fast deployment and also a longer parachute shelf life;

  • Simple and fast fixation allows an universal mounting on all machines available on the market.

​

Resistance:

  • The rescue parachute strap is of Aramid/Kevlar, ensuring a rupture resistance of 300 kg (661lb). The lines and the strap are knots free, 100% mechanical resistance and an outstanding finish, for an optimal lifespan;

  • The parachute is made of the same quality standards than a rescue parachute ULA. The fabrics have a silicon coating, with a really low mass (only 32 g/m2), that offers an extremely light system.
     

A low impact energy:

  • The parachute design was developed to offer a lighter, more compact rescue system, flight stability and opening efficiency. Low sink rate with a maximum impact energy of 66 J for a 4.9 kg (10.8 lb) drone, with a rescue parachute kit weighing just 250 gr;

  • The result of this low-impact energy allows you to register the equipment according to your country's regulations.

​

Security, safety and reliability pledge:

  • Pyrotechnic free: air transport and maintenance routine easy and safe, SAFETECH® prevents uncontrolled explosion risk;

  • The parachute is free from  permanent pressure: shelf life increased, super fast and efficient deployment;

  • Fuse system free: no useless battery weight, deployment time shorter and optimized, no Lipo battery inflating risk and no fire risk.

TECHNICAL SPECIFICACIONS

  • ST60X tube dimensions: 150 x 60 mm / 5.9 x 2.4 in;

  • Material: Carbon;

  • Total weight: 250 gr (with adaptor);

  • Servomotor connector: UNI;

  • Signal: PWM compatible with a transmitter or a stand-alone module;

  • Tension: 4.8 to 7.2 v;

  • Flat area: 1.8 m2 / 19.4 ft2

  • Lines: Dynema / Spliced Aramid Kevlar (no knot);

  • Fabrics: 32 gr/m2 with silicon coating;

  • Fixation strap: Aramid 300 daN (300 kg / 661.4 lb);

  • Super fast deployment: 0.3 - 0.8 s;

  • Low sink-rate:  2.9 to 5.3 m/s;

  • Easy to install;

  • Universal mounting;

  • Locked for the transport.​

KIT ST60X - INSPIRE 1

Pioneer in the drone rescue parachutes development, OPALE Parachutes introduces its brand new range of SAFETECH® products.

​

The kit will allow you to install the rescue parachute system SAFETECH ST60X in only few minutes on your DJI INSPIRE 1. And without doing any modifications on the DJI.

04-IATECPS- OPALE Parachutes - Kit Safetech ST60X - INSPIRE 1.jpg
Logo IATEC.png
10-IATECPS- OPALE Parachutes - Kit Safetech ST160 - MATRICE 600 MATRICE 600 PRO.jpg

Simple and groundbreaking technology:

  • Parachute rescue system will allow you to secure your drone in any circumstances;

  • The ST60X, the main parachute is ejected and deployed between 0.8 s, with a deployment height between 3 and 8 m. The Safetech® does not apply a permanent pressure on the parachute, which allows to guarantee a safe ejection, a super fast deployment and also a longer parachute shelf life;

  • Simple and fast fixation allows an universal mounting on all machines available on the market.

​

Resistance:

  • The rescue parachute strap is of Aramid/Kevlar, ensuring a rupture resistance of 300 kg (661lb). The lines and the strap are knots free, 100% mechanical resistance and an outstanding finish, for an optimal lifespan;

  • The parachute is made of the same quality standards than a rescue parachute ULA. The fabrics have a silicon coating, with a really low mass (only 32 g/m2), that offers an extremely light system.
     

A low impact energy:

  • The parachute design was developed to offer a lighter, more compact rescue system, flight stability and opening efficiency. Low sink rate with a maximum impact energy of 66 J for a 4.9 kg (10.8 lb) drone, with a rescue parachute kit weighing just 220 gr;

  • The result of this low-impact energy allows you to register the equipment according to your country's regulations.

​

Security, safety and reliability pledge:

  • Pyrotechnic free: air transport and maintenance routine easy and safe, SAFETECH® prevents uncontrolled explosion risk;

  • The parachute is free from  permanent pressure: shelf life increased, super fast and efficient deployment;

  • Fuse system free: no useless battery weight, deployment time shorter and optimized, no Lipo battery inflating risk and no fire risk.

TECHNICAL SPECIFICACIONS

  • ST60X tube dimensions: 150 x 60 mm / 5.9 x 2.4 in;

  • Material: Carbon;

  • Total weight: 220 gr (with adaptor);

  • Servomotor connector: UNI;

  • Signal: PWM compatible with a transmitter or a stand-alone module;

  • Tension: 4.8 to 7.2 v;

  • Flat area: 1,8 m2 / 19.4 ft2

  • Lines: Dynema / Spliced Aramid Kevlar (no knot);

  • Fabrics: 32 gr/m2 with silicon coating;

  • Fixation strap: Aramid 300 daN (300 kg / 661.4 lb);

  • Super fast deployment: 0.3 - 0.8 s;

  • Low sink-rate:  2.9 to 5.3 m/s;

  • Easy to install;

  • Universal mounting;

  • Locked for the transport.​

06-IATECPS- OPALE Parachutes - Kit Safetech ST160 ST60X ST80D ST60X - MATRICE 600 INSPIRE

OPALE Parachutes Systems for drones are designed to safely lower the drone in case of an emergency, reducing the risk of damage to the aircraft or third parties.

​

These systems can be particularly useful in applications where safety is paramount, such as in the commercial drone and eVOLTs industry and unmanned aviation.

​

​

*NOTE:

Consult us to find out more about accessories and options.

*SELF-SERVICE store is for BRAZIL clients only. US clients must contact us through contact@iatecps.com for pricing and delivery conditions.

bottom of page