top of page

TRITEX ndt was formed in early 2007 and since its inception has become one of the leading manufacturers of portable ultrasonic thickness gauges worldwide.

​

TRITEX ndt is committed to providing quality multi-eco ultrasonic thickness gauges with very high standards. They work closely with their stakeholders, including customers, suppliers and employees, to ensure the best possible products and services and customer satisfaction with minimal impact on the environment.

05-IATECPS-TRITEX ndt-Multigauge 6000 Drone.jpg

IATEC Plant Solutions can now share its extensive experience in portable multi-echo ultrasonic thickness gauges and help its customers select, customize, purchase and maintain the full range of TRITEX ndt solutions.

MULTIGAUGE 6000 DRONE

The MULTIGAUGE 6000 DRONE THICKNESS GAUGE has been designed specifically to mount onto a drone or UAV. This new technology has already had many successful installations on various models of drone and this is the first dedicated drone thickness gauge available worldwide.

FEATURES:

​

  • Ignores coatings up to 6 mm thick using Multiple Echo;

  • Coating Plus+ ignores coatings up to 20 mm;

  • ŸEasily installs onto most work class drones;

  • ŸAutomatic Measurement Verification System (AMVS);

  • ŸWirelessly transmits measurements up to 500 m;

  • Works with Tritex Gel Dispenser;

  • ŸLightweight;

  • ŸNo zeroing required;

  • 10 Vdc - 32 Vdc input supply;

  • ŸSingle crystal soft faced probe;

  • ŸEasy calibration;

  • ŸIntelligent Probe Recognition (IPR);

  • ŸFree calibration for the life of the gauge.

15-IATECPS-TRITEX ndt-Multigauge 6000 Drone.jpg

TRITEX Gel Dispenser

​

Ultrasonic Thickness Gauges rely on good coupling to the surface being measured and the best option for doing this is to use a gel couplant specifically designed for the job.

The TRITEX Gel Dispenser allows for a small amount of gel to be pumped onto the surface of the probe wirelessly by clicking a button on the Communicator software.

It is connected to the MULTIGAUGE 6000 DRONE gauge which receives the signal from Communicator and in turn sends a signal to the pump within the gel dispenser for a preset time.

Gel is pumped from the internal reservoir onto the face of the probe at the optimum time.

​

Features:

​

  • Pumps couplant directly to the probe face only when needed;

  • Wireless control from Communicator Software;

  • Lightweight;

  • 70 ml couplant reservoir;

  • Facility to mount onto most drones.

​

Communicator Software:

​

  • The MULTIGAUGE 6000 DRONE gauge uses wireless technology to transmit the readings to the PC or laptop, where dedicated communicator software displays the measurements in real time;

  • Each measurement can also be stored in a .txt file format which can be opened in proprietary programs to produce reports.

14-IATECPS-TRITEX ndt-Multigauge 6000 Drone.jpg
17-IATECPS-TRITEX ndt-Multigauge 6000 Drone.jpg
16-IATECPS-TRITEX ndt-Multigauge 6000 Drone.jpg

SPECIFICATIONS:

​

MULTIGAUGE 6000 DRONE

  • Sound Velocity Range: from 1000 m/s to 8000 m/s (0.0394 in/μs to 0.3150 in/μs);

  • Probes: Single crystal soft faced - 2.25 MHz, 3.5 MHz & 5 MHz;

  • Probe Measurement Range: 3 - 250 mm (0.120” to 10”), 2 - 150 mm (0.080” to 6”) & 1 - 50 mm (0.040” to 2”);

  • Probe Sizes: 6 mm (0.25”), 13 mm (0.5”) & 19 mm (0.75”);

  • Measurement Mode: Multiple Echo;

  • Resolution: 0.1 mm (0.005”) or 0.05 mm (0.002”);

  • Accuracy: ± 0.1 mm (0.005”) or ± 0.05 mm (0.002”);

  • Display: Communicator software on PC or laptop;

  • Data Transmission: Wireless RF, 2.4 GHz - Internationally Acceptable;

  • Coatings Range: Up to 6 mm (Standard Mode); up to 20 mm (Coating Plus+);

  • Power Supply: 10Vdc - 32Vdc Polarity Protection;

  • Wireless Transmission Range: Up to 500 m;

  • Gauge Dimensions (Including Connectors and Switches): 139 mm x 62 mm x 31 mm (5.47” X 2.44” X 1.22”);

  • Gauge Weight: 150 g (5.3 ounces);

  • Probe Weight (Lightweight Housing): 25 g (0.88 ounces);

  • Probe Cable Weight (1.5 m): 65 g (2.3 ounces);

  • Environmental: IP65 RoHS and WEEE compliant;

  • Operating Temperature: -10°C to +50°C (14°F to 122°F);

  • Storage Temperature: -10°C to +60°C (14°F to 140°F);

  • Total Weight: 525 g.

​

The TRITEX MULTIGAUGE 6000 has been manufactured to comply with British. Standard BS EN 15317:2013, which covers the characterisation and verification of ultrasonic thickness measuring equipment.

​

​

PROBE HOLDER

  • Dimensions (Flexible Cage): 110 mm x 82 mm (4.33” x 3.23”);

  • Weight (with 2 x 250 mm sections): 105 g (3.7 ounces).

​

​

GEL DISPENSER

  • Power Supply: 6 Vdc taken from MULTIGAUGE 6000 Drone Gauge;

  • Reservoir: 70 ml;

  • Flow Rate (water): 90 ml / min;

  • Pressure (water): 9 psi;

  • Tubing: Silicon, 2.4 mm (0.1”);

  • Dimensions (Including switches and connectors): 110 mm x 68 mm x 45 mm (4.33” x 2.67” x 1.77”);

  • Weight including 1.5 m Tubing (Empty): 180 g (6.35 ounces);

  • Environmental: IP65 RoHS and WEEE compliant;

  • Operating Temperature: -10°C to +50°C (14°F to 122°F);

  • Storage Temperature: -10°C to +60°C (14°F to 140°F).

14-IATECPS-TRITEX ndt-Multigauge 6000 Drone.jpg

Drone Probe Holder

​

The Probe Holder has been designed to accurately present the probe onto the surface being measured. 

The connecting spring allows flexibility in all directions and the cone shaped guard ensures the probe is aligned flat onto the surface. 

The lightweight construction can be used with most drones. It is supplied with two 250 mm x 16 mm diameter carbon tubes to extend the probe out beyond the drones rotors. 

A specially designed system allows couplant to be pumped onto the surface of the probe using the TRITEX Gel Dispenser.

bottom of page